Yaesu FT-710 AESS HF/50 MHz Base/Portable Transceivers w/SP-40 Speaker
Yaesu FT-710 AESS HF/50 MHz Base/Portable Transceivers w/SP-40 Speaker
The Yaesu FT-710 AESS represents the next evolution of HF/50 MHz SDR technology, delivering exceptional performance and powerful digital processing in a compact, operator-friendly package. Designed for both portable operators and base-station users, the FT-710 brings the advanced engineering of Yaesu’s high-end FTDX series into a more accessible, streamlined form factor — without sacrificing capability.
Built around a cutting-edge SDR architecture, the FT-710 offers superb receiver performance, outstanding interference reduction, and smooth, intuitive control through its 4.3-inch high-resolution TFT touch display. Combined with the Acoustic Enhancement Speaker System (AESS), this transceiver produces rich, high-fidelity audio that dramatically elevates the listening experience.
Key Features
✔ Advanced SDR Architecture
-
Powerful RF front-end with low-noise oscillator system for excellent multi-signal handling
-
High-speed DSP enables precise QRM reduction and real-time interference control
-
3DSS (3-Dimensional Spectrum Stream) spectrum scope enhances signal visualization
✔ AESS High-Fidelity Audio System
-
Digital audio enhancement creates spacious, immersive RX audio
-
Includes the SP-40 external speaker for richer, clearer sound
-
Mid-low frequency enhancement paired with side-speaker processing for superior clarity
✔ Operator-Focused Touch Display & Controls
-
Large 4.3" color touch screen for quick access to menus and settings
-
Ergonomic front panel with large tuning dial and intuitive layout
-
Filter display shows passband, AF spectrum, and interference filtering status in real-time
✔ Memory & Operating Enhancements
-
QMB (Quick Memory Bank) stores up to 10 dedicated channels with full mode, filter, and TX/RX settings
-
FT8-friendly Preset Mode with up to five parameter profiles
-
Large VFO Mode Indicators for instant confirmation of VFO-A, VFO-B, memory, and split operation
✔ Built-in Antenna Tuner + External Tuner Support
-
High-speed internal ATU with 100-channel memory
-
Supports external FC-40 Auto Antenna Tuner (via rear panel connection)
✔ Modern Connectivity
-
SD card slot for saving settings, memories, screenshots, and firmware updates
-
Dual USB ports:
-
USB-A for USB keyboard input and additional control
-
USB-B for CAT control, digital mode audio, and TX control
-
DVI-D port for connecting an external high-resolution monitor
✔ CW, Contest & Utility Features
-
CW Zero-In, Auto Zero-In, Keying Shaping, CW Reverse
-
Contest Memory Keyer
-
3-stage parametric EQ
-
IPO (Intercept Point Optimization)
-
AGC and Band Stack functions
-
ATAS antenna system support
-
Compatible with FH-2 Remote Keypad (optional)
✔ Remote Operation Ready
-
Supports future Network Remote Control System (via optional SCU-LAN10)
Included Accessories
-
SSM-75E Hand Microphone
-
SP-40 High-Quality External Speaker
-
DC Power Cable with fuse
-
Spare fuse
-
Operating manual
Power supply not included.
Technical Specifications
Frequency Coverage
Transmit:
-
1.8–50 MHz (Amateur bands, US allocations)
Receive:
-
30 kHz–75 MHz wideband
-
1.8–29.699999 MHz
-
50–53.999999 MHz
-
70–70.499999 MHz
Modes
-
CW (A1A)
-
AM (A3E)
-
SSB USB/LSB (J3E)
-
FM (F3E)
Frequency Steps:
-
1/5/10/20 Hz (SSB/CW/AM)
-
100 Hz (FM)
-
1 Hz fine tuning available
Power Output
-
SSB/CW/FM: 5–100W
-
AM: 5–25W carrier
Impedance
-
50Ω unbalanced (ATU off)
-
16.7–150Ω (HF, tuner on)
-
25–100Ω (50 MHz, tuner on)
Electrical
-
Power requirement: 13.8 VDC
-
Current draw:
-
RX (no signal): ~1.8A
-
RX (with signal): ~2.2A
-
TX (100W): ~21A
General
-
FM deviation: ±5.0 kHz / ±2.5 kHz (Narrow)
-
Harmonic suppression:
-
Better than –50 dB (1.8–29.7 MHz)
-
Better than –63 dB (50 MHz @ 100W)
-
Operating temp: 0°C to +50°C
-
Frequency stability: ±0.5 ppm
Connections & Expandability
-
1 antenna port
-
USB and RS-232 for PC/rig control
-
6-pin mini-DIN for digital modes
-
External display capability (DVI-D)
-
External tuner support (FC-40)
Dimensions & Weight
-
W × H × D: 9.409" × 3.150" × 9.724"
-
Weight: 9.921 lbs
Warranty: 3 years
Quantity: Sold individually